Skip to content
CAD for One · Explore the drawing library. Start with 3D Exercise 001.

CAD Notes

Software guides, modeling habits, and ideas for your next drawing exercise.

RSS feed

SolidCraft 0.40.1 vs FreeCAD 26.3: Technical Differences and Which to Choose

Compare SolidCraft 0.40.1 and FreeCAD 26.3 across parametric modeling, file exchange, engineering workflows, and automation, with practical advice on choosing between them.

Read more →

November 13, 2026

Cover illustration for SolidCraft Development Watch: Equal-Length Curve Points, Saved Workspaces, and Render Startup Fixes

SolidCraft Development Watch: Equal-Length Curve Points, Saved Workspaces, and Render Startup Fixes

What recent SolidCraft development merges mean for sketch layout, repeatable workspaces, and software-GPU rendering—and what remains outside the shipped RC.

Read more →

November 7, 2026

Cover illustration for FreeCAD Development Watch: Counterbores, Adaptive Clearing, and the CAM Changes Worth Testing

FreeCAD Development Watch: Counterbores, Adaptive Clearing, and the CAM Changes Worth Testing

Recent FreeCAD CAM merges explained through practical machining checks: stepped holes, rest machining, and updated Profile and PocketShape panels.

Read more →

November 7, 2026

Cover illustration for SolidCraft 0.40.0 RC2: Where to Download It and What’s New

SolidCraft 0.40.0 RC2: Where to Download It and What’s New

Find the official SolidCraft 0.40.0 RC2 installers for Windows, macOS, and Linux, and understand the changes and compatibility limits before testing.

Read more →

November 6, 2026

Cover illustration for FreeCAD 26.3: What Changes When You Sit Down to Model?

FreeCAD 26.3: What Changes When You Sit Down to Model?

A practical user guide to FreeCAD 26.3: sketch references, feature offsets, patterns, mass properties, assemblies, and drawings.

Read more →

November 6, 2026

Cover illustration for Five CAD Geometry Kernels Compared: What Actually Matters When You Model?

Five CAD Geometry Kernels Compared: What Actually Matters When You Model?

A practical comparison of Parasolid, ACIS, CGM, OCCT, and SMLib, with a repeatable test plan for booleans, fillets, tolerances, and file exchange.

Read more →

November 6, 2026

Cover illustration for Trying a New FreeCAD Build? Bring a Familiar Part

Trying a New FreeCAD Build? Bring a Familiar Part

Turn a familiar CAD exercise into a small, repeatable version check before moving important work to a different build.

Read more →

November 2, 2026

Cover illustration for The Best Test of a FreeCAD Model Is the Next Edit

The Best Test of a FreeCAD Model Is the Next Edit

A practical revision exercise inspired by the FreeCAD 1.0 milestone: check the model after changing it, not just after building it.

Read more →

November 2, 2026

Cover illustration for FreeCAD Sketcher: Enter the Dimension While You Draw

FreeCAD Sketcher: Enter the Dimension While You Draw

Understand on-view input, then use a small sketch exercise to separate size, position, and design intent.

Read more →

November 2, 2026

Cover illustration for Trying SolidCraft? Give It a Small Part and a Real Revision

Trying SolidCraft? Give It a Small Part and a Real Revision

A repeatable exercise for evaluating sketch edits, feature rebuilds, saved files, and exports in SolidCraft.

Read more →

November 1, 2026

Cover illustration for SolidCraft: A New Parametric CAD Tool Worth Understanding

SolidCraft: A New Parametric CAD Tool Worth Understanding

An introduction to SolidCraft, its editable modeling timeline, and the checks that matter before relying on a new CAD tool.

Read more →

November 1, 2026

Cover illustration for Sketcher, Part Design, TechDraw: A Short Route Through FreeCAD

Sketcher, Part Design, TechDraw: A Short Route Through FreeCAD

Understand what three FreeCAD workbenches do, and when to move from a sketch to a part to a drawing.

Read more →

November 1, 2026

Cover illustration for FreeCAD for Drawing Practice: Where to Start

FreeCAD for Drawing Practice: Where to Start

A practical introduction to FreeCAD for readers who want to turn dimensioned drawings into editable parts.

Read more →

November 1, 2026

Cover illustration for Welcome to CAD For One

Welcome to CAD For One

Explore 2D CAD drawing exercises, 3D modeling practice, and CAD learning notes on CAD for One.

Read more →

July 21, 2026

Cover illustration for Sheet Metal Bend Neutral Factor (K-Factor)

Sheet Metal Bend Neutral Factor (K-Factor)

Complete K-factor reference table for sheet metal bending - steel, aluminum, copper, stainless steel.

Read more →

July 21, 2026